Akai X7000 sampler

The dynamic duo, Akai X7000 sampler and Alesis MMT-8 sequencer

A core part of our band Rorschach, it belongs to the singer, but I’ve had it in storage since the late 90’s.

Two years ago, I dug it out and found that, after a belt replacement, it was still working, and most of the samples on the QuickDisks were still loading. So, I started writing a program to transfer samples to a computer for backup. Akai wasn’t using the standard MIDI Sample Dump Standard (SDS) for those, perhaps because it hadn’t been invented yet? There were some programs back in the day that could do it, like SampleWrench on the PC, I think, and an Atari program called X7000 by Harald Plontke.

I actually tried the Atari program in an emulator, but didn’t get it to work, at least not for receiving samples, which was the most important part. So, using that source code and some documentation from the web (including a scan of a badly photocopied fax which I actually had in the late 90s when I first thought about implementing it, but didn’t have enough time to look into then), I got to work. That old scan was so bad you practically had to guess some of the hex values in the document! Anyway, I managed to get sample transfer to the sampler working, but not receiving.

Then this year I looked at it again. With some help from Claude, it seemed the problem was that the OS delivered the SysEx data complete in one package, whereas the sampler needs to receive ACK messages in between. The solution was to send ACKs blindly at a fixed interval, and it was happy.

However, my Java program was very utilitarian, so I thought: maybe it’s possible, with help from Claude, to make a web version instead? That would be much easier for people to use without needing any Java setup. Then, just for fun, I also turned it into a virtual sampler. It works a bit like the original hardware, complete with its limitations, like a maximum of 6 (or 16 with the expansion) samples in memory, and 32 programs. But it can have multiple banks of 6 or 16 samples, so you can switch between banks.

It can load samples from WAV or QD images and transfer them to an S700 or X7000, as well as receive samples from the hardware and save them to a WAV or QD image. You can also create a bank in the program and send all the samples and programs to the sampler in one go (though that takes some time). Plus, you can save all banks to a memory file and load them back in. Saving QD images hasn’t been tested on a real Gotek drive yet, I have one, but I haven’t installed it in the X7000 yet since my first priority was backing up all the samples I had on my QD disks.

Program in action dumping samples from the X7000

The program is here: https://rogerkl.github.io/Axs7/

I’m also working with an FM-1 firmware which has a sample playback engine based on the same and a sequencer engine based on the mmt-8, so it can get samples from the same sample dump as X7000/s700 and also receive sysex data for sequences from an mmt-8 dump, it also has a part that implements the Alesis HR-16 drum machine, and can receive sysex for that as well. Only tested on an emulator so far, as I’ve not yet received an FM-1 to test on. https://rogerkl.github.io/sm-87/